Breathable, durable totally mat water based wood paint.
No undercoat or primer required!!
Type F: the same wood paint with linseed oil but now strengthened with alkyd, for all pre-painted and impregnated wood and wood treated with a primer.
Type RDM: natural wood paint for all untreated and bare wood with raw or sanded surface. Perfect for treating grey and weathered wood. The wood must have an open surface for the best result.
Type S: natural wood paint for all untreated and bare wood with raw or sanded surface. Perfect for treating grey and weathered wood. The wood must have an open surface for the best result.
Ideal for exterior wood. Inside only for wood that is not exposed to friction.
New work: remove any dirt and dust with a damp cloth. Lightly sanding improves the result on smooth new wood. For grey wood: scrub with soap and water using a brush and rinse with water.
Maintenance and remachining: Remove the old paint (for Type S, this should be complete; the wood’s surface must be totally open), if necessary using a steel brush or by sanding. Wash the surface with water and a little soap; rinse with water. Allow to dry until 17% damp.
Use brush or spray. For spraying, dilute (approx. 20%)
Dilute with water.
Clean brushes, work material and clothing with soap and water
Mix before use. Make sure that the paint is applied thoroughly in cracks and seams. For dark colours, one application is often enough. For light colours and smoother surfaces: first layer diluted with 10 –20% water. After drying, apply second layer. Do not apply the paint too thickly.
Dust dry 30 min.
Repaintable after 2 hours
Waterproof after 1 day
Store dry and at room temperature (10 – 20 C), prevent exposure to temperatures below 5 C.
Consumption: S type per litre: 3 – 6.5 m2
F type per litre: 5 – 7 m2
In unopened packaging, has a shelf life of at least 1 year
Please take packaging and paint remnants to a recycling centre
* Moose Färg is a registered trademark.
Moose Färg was developed and is produced in Sweden.